Description

Lot - 1pcs. (Large quantity available) GS-35B Tube Power Triode NEVZ NOS in ORIGINAL BOX Attention: Dates and Prints on tubes may not match what you receive upon purchase. Russian generator triode GS-35B tube ceramic-metal for power amplification at frequencies up to 1000MHz. Output power up to 1500W Description Generator triode GS-35B in ceramic-metal design for operation in the decimeter wave range. Designed to generate and amplify the power of high-frequency oscillations in the frequency range up to 1000MHz with an output power of at least 1000W. The GS-35B triode is used to generate oscillations in self-oscillators with external feedback and to amplify power in a continuous mode in circuits with a common grid in radio engineering devices for general and special purposes. It is produced in ceramic-metal version with external anode. Cooling forced air. Stamp of technical control department of the manufacturer ” ОТК “ GS – generator tubes for generating frequencies over 300MHz 35 – the number of the serial number of the development of this type of tube; B – a letter indicating the type of forced cooling: B – air. Technical specification: (at Un = 6.3V; Ua = 1000V; Uc2 = 325V; Ia = 400mA) Filament current: 2.95 ±0.3A Cathode emission current in pulse (at Ua= 600V): not less than 15A Grid tension at operating point: not less than 9 ± 3V Slope (at Uc1 = 1V): not less than 30mA/V Permeability (at Ua = -200V): not less than 1 ± 0.2% Net power: not less than 350W Limiting performance: Cathode current: 1.4A Heating voltage: 12.6 ± 0.7V Anode voltage: 3kV Anode voltage (instantaneous value): 6kV Grid voltage (instantaneous value): 120V Grid tension: -400V Power dissipated by the anode: 2kW Power dissipated by the grid: 26W Anode temperature: 200°C Temperature of cathode and grid leads: 120°C Reliable packaging for your order Worldwide Shipping See other lots